A 2014 Aviat Husky A-1C-180 has been spotted for sale. The listing states (in part):

Looking for a reliable and immaculate aircraft that is low on hours and has no damage history? Look no further than this 2014 Aviat Husky A-1C-180 with just 336 total hours and 244 hours since its last overhaul. It features a Power Flow exhaust system with STC no. SA03858AT, a beautiful paint scheme with clean tan leather seats, and is always hangared, ensuring that it is in pristine condition. The aircraft sits on 26″ AKB tires and a baby bushwheel tail-wheel, making it the perfect choice for those who demand quality. And with its most recent annual completed in October of 2023, it is ready to take on the skies once again. Don’t miss this opportunity to own one of the best aircraft on the market! Plus, it’s worth noting that the owner is willing to trade for an A36 Bonanza with no damage history.

The aircraft is located in Granite Falls, MN and is currently available for bidding. Click here to check out the complete listing on eBay.

A 1957 de Havilland DH82A Tiger Moth (Jackaroo) has been spotted for sale. The listing states (in part):

For sale, Thruxton Jackaroo, registration G-AOEX, which is the ‘Series 1’ prototype from a modified DH82A Tiger Moth. The Jackaroo was developed at Thruxton aerodrome in Hampshire to create a four-seat cabin biplane, using war surplus Tiger Moth air frames. Two prototypes were built at Thruxton in 1956; G-AOEX was finished as a standard four-seater with cabin and known as a Series 1. It was test flown by Lt-Cdr Pat Shea-Simonds on March 2, 1957. Following the flight of the first prototype in March 1957, a total of nineteen aircraft were converted, three for use as crop sprayers”. G-AOEX is 1 of only 5 that are airworthy today. Restoration was complete December 22, will come with a new ‘Permit to Fly’ issued by the LAA and very low flying hours since restoration complete. Formally owned and operated by the Wiltshire School of Flying, still in WSF red and silver colours. Aircraft has always been hangered during ownership (since 1985)

The aircraft is located in Basingstoke, United Kingdom and is currently being offered for £58,000 Click here to check out the listing on eBay.

The latest video build log from DX Modelworks features Microaces’ new 1/24 scale Sopwith Pup.

The micro RC model kit was released in December 2023 and this video details construction of the initial, limited edition offering wearing the colors of N6453, the first aircraft to land on a moving ship. Like the channel’s previous videos, the detailed photo documentation and tips will likely be helpful to both new and experienced modelers alike.

Click below to check it out. If you’re pleased with what you see, please consider subscribing to the channel. Likes and shares are also greatly appreciated!

[continue reading…]

A 1948 Super Navion has been spotted for sale. The listing states (in part):

1948 “Super” Navion, top of pyramid, io-550 300 h.p., airforce scheme, beautiful, slightly hurt, cheap!… The airframe has been modified to accept the… the Continental 300 h.p. IO-550b! This particular engine… has only 647 hours since brand new (not just since overhaul)! … the interior on this airplane is unparalleled!… This aircraft has a STEC 55x altitude hold system with GPSS built in!! Top of the line, spared no expense!… A mechanic who was unfamiliar with the plane ran it up before changing the oil, but gave it full power for some reason, and the 300 h.p. engine jumped the chocks and allowed the airplane to run into a Cherokee with the right wing, and break the nose fork at the edge of the pavement… the nose fork (the wheel, chrome strut and trunion are fine), outboard wing leading edge and small amount on the tip tank is the only airframe damage that has occurred to this magnificent airframe from this event!… Sold with logbooks for airframe engine and prop, plus 337’s and other supporting materials…the fix is easy, the airplane is awesome and the price is a fraction of what the airplane was insured for!

The aircraft is located in Prineville, Oregon and is currently being offered for US $34,950, although bids are also being accepted. Click here to check out the listing on eBay, which includes an abundance of additional photos and details.

The latest video build log from DX Modelworks focuses on Aero Graphics’ 24.5″ span Velie Monocoupe 113.

The kit is based on plans designed by David Deadman and is a beautiful representation of this 1928 design. This particular build sees the model built for three-channel RC with an array of modifications, including custom 3D printed components. The video concisely details the project, and like the channel’s previous videos, its photo documentation and tips will likely be helpful to both new and experienced modelers alike.

Click below to check it out. If you’re pleased with what you see, please consider subscribing to the channel. Likes and shares are also greatly appreciated!

[continue reading…]

A 1950 Cessna 170 A has been spotted for sale. The listing states:

1950 Cessna 170A model. TT 2330, SMOH 1348, Prop 534. Aircraft has many updates. Has a Icon A 200, Narco 165 transponder, Intercom 2 place Sig. 400, panel Elt control, aleron electric trim, hard wired and pedestal for Garmin 660, Bush tail wheel, upgraded wheels and brakes, recent all new windows and one piece windshield, nice interior, wing strobes, remote oil filter and P Ponk gear mod. Complete logs back to 1953. Engine runs strong 3 new cylinders all compression 73/80 or higher. Nice paint, two belly skins are in white primer. Aircraft shows well.

The aircraft is located in Camp Verde, Arizona and is currently available for bidding. Click here to check out the listing on eBay, which includes a number of additional photos.

A 2005 Murphy Renegade Spirit II open cockpit biplane has been spotted for sale. The listing states (in part):

Built 2005 Murphy Renegade Spirit II. Experimental aircraft. Open cockpit bi wing. Not currently airworthy but in good shape. Always hangered… Engine just need maintenance but otherwise very nice aircraft… Last flown 2014-2015 not sure if all logbooks are current. Has blueprints and some logs. Everything was working fine before stored at hanger. Hanger rental can be taken over by new owner. Details: – N52JC tail number – Serial no. 483 – Rotax engine (Rotax 503 DC 2 Cyl 2 stroke) – Experimental classification – Most recent airworthy date: 10/24/2018… – Engine cowlings on hand – Wheel skirts on hand – GPS unit on hand- Several original manufacturing diagrams

The aircraft is located in Blaine, Minnesota and is currently available for bidding. Click here to check out the listing on ebay, which includes a number of additional photos / details and a walkaround video.

A 1946 Commonwealth (Rearwin) CW185 Skyranger airframe project has been spotted for sale. The listing states (in part):

1946 Commonwealth (Rearwin) CW185 airframe complete, no accident, hail only!… This airplane did not crash or have an accident. It was tied down outside without the full custom Bruce’s wing covers, cowl covers and fuselage covers installed (these covers are all included), when a hailstorm came by and damaged the Ceconite covering on the tops of the wings and fuselage. There was no structural damage that occurred as a result of the hail. This aircraft has been upgraded over the years, and now has: Cleveland wheels and brakes, Scott tailwheel assembly… Sold with the complete logbooks since day 1, which was 12/5/1946!

The project is located in Minneapolis, Minnesota and is currently available for US $6,995, although bids are also being accepted. Click here to check out the complete listing on eBay, which includes an abundance of additional photos and details.

An Avro Vulcan cockpit section described as being in “good restorable condition” has been spotted for sale. The listing states (in part):

This is a very rare example and has been dry stored for many years but is currently in outside storage… The Pilot positions do have the Ejection Seats and some of the side consoles along with other items but I cannot be more precise… Clearly this Cockpit does need restoration but the cockpit was removed aft of the transport joint and therefore not open to the elements… In good restorable condition for display only with no airworthiness attached or implied.

The section is located in Norwich, United Kingdom and is currently available for bidding. Click here to check out the complete listing on eBay.

A 3/4 scale Jurca P-51D Mustang (Jurca MJ-77 Gnatsum) has been spotted for sale. The listing states (in part):

Jurca plans call for aircraft made of wood construction covered with fabric. They do not require expensive tools or exotic parts. This project is sold with a new, clearly printed set of plans on quality paper, not the crumbling original poor quality paper that has deteriorated over time… This aircraft project consists of built assemblies of the Fuselage, Tail, Rudder, Wing Spar, most wing components/ ribs built, Ailerons built, Pilots seat, windshield, Fiberglass nose bowl, tail fillet fairing, and build boards for constructing wings. Will need instruments, landing gear, Top Canopy, Engine and prop, and forward cowl built to accommodate your choice of engine.

The project is located in Lawrenceville, Georgia and is currently available for bidding. Click here to check out the complete listing on eBay, which includes a number of additional photos and details.